a full production line for artificial stone

News 2024年11月15日 6

Lya group co.,ltd supply a full production line for artificial stone typically includes several stages of processing and machinery for each stage:

Step one–Mixing and batching: Raw materials such as crushed stone, sand, and resin are mixed together in a large mixer, along with any desired colorants or additives.

Step two–Molding: The mixed materials are poured into molds of various shapes and sizes. The molds are typically made of silicone or rubber and can be reused many times.

Step three–Pressing: The filled molds are then placed into a hydraulic press, which applies pressure to the mixture to compact it and remove any air bubbles.

Step four–Curing: The pressed molds are then moved into a curing oven, where they are heated to a specific temperature and held there for a set amount of time to allow the mixture to fully harden.

Step five–Cutting and shaping: Once the stones have cured, they are removed from the molds and cut to the desired size and shape using a diamond saw.

Step six–Polishing: The stones can then be polished using a series of abrasive pads to achieve a smooth, glossy surface.

Quality control: Throughout the production process, quality control checks are performed to ensure that each stone meets the desired specifications and standards.

There are many different types of machinery and equipment used in each stage of the production process, including mixers, molds, hydraulic presses, curing ovens, diamond saws, polishing machines, and quality control equipment. The specific equipment used will depend on the type of artificial stone being produced and the volume of production required.