Unloading and staking machine in the veneer cladding stone production line
News 2023年10月17日 139
It stack or unloading the culture stone molds pallet one by one, totally 14 layers. Adopt frequency motor driving, stacking speed adjustable. Driven by motor for up and down displacement, pneumatic gripper and limit switch are required.
Working process:When the pallet enters the depalletizer, the gripper is in the middle position. After the pallet enters, it starts to sink, and then it is transferred to grab the part above the penultimate pallet and lifted to the upper position, and the bottom pallet starts to be transported forward. After leaving the plate lifter completely, the rest of the trays start to descend to the lower position, and then repeat the above actions.
Auto casting machine for veneer stone making：
It includes the mixing hopper, concrete doser with pneumatic control and storage silo and load cell
concrete dosing can be calculated kilograms or by time，with four Weight sensor，Dosing is accurate, the error ≤50g.
Pneumatic door switching design, not wasting any more concrete for each dosing. Mixing Hopper could save 1.5cbm wet concrete, has four storage silo under each doser, one time could save 30kg wet concrete. Diameter of dosser about 15cm, with frequency motor control the screw speed,Using the buffer cylinder, the switch reduces damage, reduces noise, and assists in feeding more accurately.
Digital screen controller, with all dosing weight available by only setting up the button , it is fully automatic mode. The action process is that the mold is in place and the material opening cover is opened to start feeding to the storage bin. After the material is supplied, the material opening cover is closed and the vibration is started, followed by the next cycle. A photoelectric switch needs to be installed. With self cleaning system,360-degree high-pressure rotating water gun,controlled by the PLC2.
Chemical agent spraying machine for culture stone making：Connected with the air compressor. pray gun connect the storage tank with Chemical agent, spray the agent onto the molds. Equipped with photoelectric switch and proximity switch. With servo motor to ensure the spraying gun can remove for accurate distance and at the right setting position.