Wet Cast Line-The purpose of cement silo

News 2023年8月26日 139

The purpose of cement silo

The cement silo is generally used in the storage of bulk cement in the concrete mixing plant. The bulk cement silo is a closed tank for storing bulk materials. It is suitable for storing various bulk materials such as grain, cement, and fly ash. The tank is equipped with a material level The system can display the position and amount of material, and the hole breaking device can relieve the solidity caused by long-term material deposition. The cement silo and the screw conveying pump can be used together to transport the material to various locations. The tank is easy to install, safe and reliable. It is an ideal bulk storage tank for various mixing plants.

1. When the cement silo (tank) is working, it must be erected by a special crane, and then placed on the prefabricated concrete foundation, and the verticality of the cement silo (tank) to the horizontal plane after it is erected is checked, and then placed Its bottom is firmly welded with the foundation embedded parts.

2. After the storage bin is fixed, the cement is transported to the construction site by a bulk cement truck, and then the delivery pipeline of the bulk cement truck is connected with the feed pipeline of the cement silo (cement tank), and the gas pressure of the bulk cement truck will The cement in the tank is transported to the cement silo (tank).

3. During the process of conveying cement to the storage silo, the operator must continuously press the button of the vibration motor of the dust collector to shake off the cement attached to the bag of the dust collector to prevent the bag from being blocked and the warehouse from bursting.

4. Once the cloth bag is blocked and the pressure inside the warehouse exceeds the safety pressure of the pressure safety valve on the top of the warehouse, the pressure safety valve can be opened to release the pressure inside the warehouse and prevent warehouse explosion accidents.

5. The fullness and lack of material can be observed through the high and low material level.

6. When discharge is required, first open the manual unloading valve at the bottom of the cone, and then convey the cement out through the cement conveying device. In the process of discharging, if there is “arching” phenomenon, press the button of the electromagnetic valve of the arch breaking device in time to blow air to eliminate the “arching” and feed the material, so as to ensure the smooth supply of cement.

7. When the cement conveying device (screw conveyor) breaks down, first close the manual unloading valve at the bottom of the cone to prevent the cement from overflowing and causing waste.